Stone Savers (Bedding Material Containers)

Pro-Tec Stone Savers reduce bedding material loss.  With the Stone Saver, you confine bedding materials to the container, minimizing loss of material.  you also reduce traffic congestion and safety problems associated with front-end loader dumping from the edge of the trench.  Available in standard, heavy-duty and extra wide models.

Standard Stone Savers include:

Bottom and end formed from one continuous 1/2" plate, eliminating edges and welds at critical points.
-Rounded bottoms allows for dragging and moving in either direction easier by eliminating the plowing effect
1/4" thick side plates
Pulling eyes from towing
8" sch. 80 pipe used for the push\pull bar
Heavy angle reinforcement at point of bucket contact

Standard Stone Saver
Ht x Length X Width (inside)	Model	Weight (lbs.)
36" x 48" x 103"	SS-3	3100
36" x 63" x 116"	SS-5	4100
48" x 63" x 143"	SS-7	5000
48" x 63" x 164"	SS-9	5400
48" x 75" x 183"	SS-12	6400
48" x 75" x 222"	SS-15	7200

 

 

 

 

 

 

 

 

 

Heavy-Duty Stone Savers are ideal for large excavators and severe conditions, they include:

Heavy-duty gusseting on the push\pull arm
3/8" thick side plates
Full length inside wear bars
-Wear bars provide strength and durability, while adding service life to the Stone Saver
Front and back reinforced with tube stiffeners
Heavy-Duty models of 12 cubic yard capacity or larger include an 8" sch. 120 pipe for the push\pull bar

 

 

 

 

 

 

 

 

 

 

Extra Wide Stone Savers include:

Same feature of the Heavy-Duty models
Extra width to allow for sand and large excavator buckets

Extra-Wide Stone Saver
Ht x Length X Width (inside)	Model	Weight (lbs.)
48" x 75" x 146"	SSHW-9	6725
48" x 87" x 164"	SSHW-12	7730
48" x 87" x 195"	SSHW-15	8510
48" x 87" x 201"	SSHW-18	9620
48" x 87" x 220"	SSHW-20	10300